Conroe Mobile Home Movers
Get a free quote

Home › FAQ

Mobile home moving FAQ

Plain answers to the questions people ask most before moving a manufactured home in the Conroe area.

Get a free quote

Cost

How much does it cost to move a mobile home in the Conroe area?

As a planning estimate, published Texas pricing puts a basic local move around $1,800 to $3,500. Double-wides, long hauls, and full-service moves with complete setup often run $5,000 or more. Get written quotes for your specific home and sites. See our cost guide.

Is it worth moving an older mobile home?

It depends on condition and value. Compare the full cost of take-down, transport, setup, repairs, and site prep against the cost of a comparable home already on site. Homes built before June 15, 1976 were not built to the HUD code, and some movers and many subdivisions will not accept them.

Permits and paperwork

Do I need a permit to move a mobile home in Texas?

Yes. A manufactured home over legal size limits needs a TxDMV manufactured housing permit to travel on Texas roads. TxDMV issues it to licensed manufacturers, retailers, and installers, to registered motor carriers, and in limited cases to the owner. A single-trip permit covers one continuous move and is valid for five days.

What permits do I need in Montgomery County?

For unincorporated Montgomery County, you apply for a development permit to place the home. If public sewer is not available, the residential septic permit is applied for at the same time, since the county does not issue them separately. In a floodplain, the home must be at least two feet above base flood elevation. In Precinct 4, a culvert verification form is required. Inside a city, check the city's rules.

What do I have to file with the state after the move?

The owner applies to TDHCA for a new Statement of Ownership showing the new location, with a copy of the moving permit. TDHCA's bulletin says to submit it within 60 days of the move. Any lienholder must be paid off or consent to the move.

Can I install the home myself?

No. In Texas, every used manufactured home has to be installed by a TDHCA-licensed installer, to the standards for its wind zone. The installer files an installation report with TDHCA so the installation can be inspected.

Timeline and process

How long does a mobile home move take?

The haul itself is often a single day for a local move. Take-down and setup add one to several days, depending on sections, skirting, and utilities. Lead time is usually the bigger factor: permits, site prep, septic, and power can take weeks, so start those first.

What can delay my move?

Wet ground is the most common delay. Others include a site that is not prepared, a missing culvert or permit, trees or tight turns on the route, a home that needs tires or frame repairs, and utility providers that have not set service yet.

Who is responsible for preparing the site?

For a used home, the owner is. The installer must have you sign TDHCA's Site Preparation Notice before agreeing to move the home. See our homesite prep checklist.

Can I live in the home before it is set up?

No. Texas law says a manufactured home that has not been installed may not be occupied.

About this service

Are you a moving company?

No. We are a free referral service. We send your request to independent local movers and installers, who contact you, quote the job, and do the work. How it works.

Cost figures are planning estimates drawn from published sources listed on our cost guide, not quotes. Rules change; confirm permit requirements with the office named in each answer.

Get a free quote